Women's Denim Built to Your Measurement Chart, Not a Size Table
Custom women's jeans from 300 pcs per style: high-rise skinny, straight crop and flare fits in 8.5–13 oz denim, sampled in 7–10 days.

A women's jean fails at the waistband before it fails anywhere else. When the seat-to-waist drop is off by 2 cm, the back gapes as soon as she sits down, and the returns arrive six weeks later with a fit comment attached.
We build women's jeans from your measurement chart, not from a size table. Three measured garments in your three top-selling sizes give us the hip curve and the rise increments; the block is digitized, graded and checked on a fit model before cutting.
- Fits: high-rise skinny, straight crop, flare, wide leg, mom, plus size
- Fabric: 8.5–10.5 oz stretch, 11–13 oz rigid, 2% elastane maximum
- MOQ 300 pcs per style per color; sampling 7–10 working days
Each card is a live pattern with a confirmed measurement chart — change the fabric, wash, hardware or label and it runs under your brand.
High-Rise Skinny
10.5 oz stretch with 2% elastane, 29 cm rise, 12.5 cm leg opening, five-pocket build.
Flared
11 oz stretch, shaped knee, 24 cm hem at a 33-inch inseam, clean or raw edge.
Straight Crop
12 oz rigid, 26-inch inseam, 19 cm leg opening, mid rise, button-fly option.
Plus-Size Straight
12.5 oz rigid on a curve-graded block, 31 cm rise, 21 cm leg opening.
Bring your chart or a garment that sells; we confirm what the block needs within one working day.
- Fabric: 100% cotton rigid, cotton/elastane 98/2, cotton/T400, cotton/linen
- Weight: 8.5–10.5 oz stretch, 11–13 oz rigid, 5.5 oz for summer crops
- Fits: High-rise skinny, straight crop, flare, wide leg, mom, plus size
- Rise: Mid 26 cm, high 29–31 cm, ultra-high 33 cm at size 27
- Leg opening: 12.5 cm skinny to 26 cm wide leg, measured at the hem
- Stitching: Tex-60 topstitch on stretch, Tex-80 on rigid, tonal or contrast
- Hardware: Nickel-free brass shank, 4-hole button, YKK nylon or metal zip
- Wash options: Rinse, stone, enzyme, acid, tint, overdye, whisker, laser
- Sizes: US 0–20, EU 32–52, XXS–3XL on your grade rule
- MOQ: 300 pcs per style per color
- Sampling: 7–10 working days, 10–14 with new wash development
- Bulk lead time: 25–35 days after PP sample approval
Rise, hip at 20 cm below the waist, and thigh at the crotch seam decide whether your jean reads as high-rise or high-water. We cut a trial in your middle size, measure it flat, then adjust the block before grading — one round of samples instead of three.
Fabric, finish, hardware, label and packaging stay editable after the block is set. Elastane content is the one variable we ask you to lock early, because a 2% and a 1% version of the same fit need different grade increments.
- Fabric: stock range or buyer-supplied with a shrinkage test before cutting
- Fit: rise, hip curve and thigh edited within 1 cm without a new block
- Hardware: shank, rivet, zip tape color and back patch material
- Branding: woven label, leather patch, embroidery, hangtag, polybag

Four production finishes: a clean rinse, a soft stone, a tinted indigo and an overdye.




What a women's denim reorder depends on
Women's denim is bought on the waistband and reordered on how that waistband behaves after ten home washes. Most first orders we quote arrive with a grade rule borrowed from a men's block. The hip increments are too small and the rise increments too large, so the middle size fits the fit model and the ends of the range do not. We rebuild the grade from three garments you already sell, then check two sizes on a live model before any fabric is cut.
Stretch recovery is the second cost line. A 98/2 cotton-elastane at 9.5 oz returns roughly 95% of its stretch after five cycles. A 92/8 feels softer in the fitting room and bags at the knee by week three, which shows up as a one-star review rather than a return. We will tell you which fabric your retail price can carry instead of letting the sample flatter you.
- Send three garments that sell, in three sizes, rather than a single tech pack.
- State the stretch percentage and the recovery you need after ten washes.
- Approve pocket placement on a small and a large size — a 9 mm shift changes the hip width the eye reads.
What is the minimum order for custom women's jeans?
300 pcs per style per color. A two-style, three-color range therefore starts at 1,800 pcs. Below that we can quote from stock fabric and stock washes, which keeps sampling at 7 days but limits you to the fabrics already on our racks.
Can you grade from my existing size chart?
Yes. Send the chart plus three measured garments, one small, one middle, one large. We compare the actual flat measurements with your chart, rebuild the grade in 3–5 working days and return a counter-chart for approval before sampling. The graded chart stays on file, so a reorder skips that step entirely.
How do you stop the back waistband from gaping?
We contour the waistband 2–3 cm and, where the fabric allows, split it into two panels so it curves with the lumbar instead of cutting across it. That change is made on the paper pattern, so it costs one sample round and no extra unit cost.
What elastane percentage should I specify?
2% for a skinny that must snap back, 1% for a straight leg that should hang, and 0% for rigid vintage looks. Above 2% the garment starts to shine after 5–6 washes and the hem ripples, which is hard to correct in bulk.
Do you make petite and tall inseams?
Yes. We hold three inseams per style — 71 cm, 76 cm and 81 cm — graded as separate sizes inside the same color. Each size needs 12 pcs minimum, so a three-length run still meets the 300 pc style minimum comfortably.
Tell us what you want to make
Share the style, target quantity and launch date. You get fabric options, wash recommendations, a sampling date and a factory-direct quote — usually within 12 working hours.